Projects

This fifty-foot by eight-foot Areté FRP trail bridge is located in Coos Bay Oregon at the Sunset Bay State Park.  This bridge was delivered in 2018 and constructed…

In February of 2024 Areté Structures supplied a thirty foot by ten-foot FRP Truss Bridge for the Whites Mill Trail in Warrenton Virginia. The Fauquier County Parks and…

Areté Structures designed, fabricated and supplied eight unique pedestrian bridges for the Oregon Parks and Recreation Department in the fall of 2018.  These bridges were dark brown in…

Areté Structures was contracted to supply a 60 foot by 5-foot FRP truss bridge for the Chattahoochee River National Recreation Area in Georgia. This olive-green bridge with timber…

In the summer of 2023 Areté Structures provided 2 fully engineered FRP truss bridges and 400 linear feet of additional FRP decking to the William Finley National Wildlife…

In 2023, Oakley City Utah purchased 3 FRP truss bridges. These bridges are located on the Weber River Pathway, a non-motorized pathway that follows the Weber River Corridor…

Areté was contracted to design and manufacture the Lyon Court Connector, an FRP pedestrian/bicycle bridge that is part of the Greenway Trail Projects in Mecklenburg County, North Carolina.…

Areté Structures designed, fabricated, and supplied two bridges for the City of Bountiful Utah in the fall of 2023. The bridges were assembled and erected by Northend Builders…

PROJECT OVERVIEW In the summer of 2022 Areté Structures designed, fabricated, and delivered a forty foot by six-foot long FRP Truss Bridge to the National Park Service in…

In 2019 Areté Structures supplied (3) bridges to the National Park Service for the Redwood Forest in California. These three bridges are on the Mill Creek Horse Trail…

Project Overview In the summer of 2021, the Superior Hiking Trail along with the USFS purchased a fifty-foot Areté FRP truss bridge to replace an older trail bridge…

Project Overview In the Fall of 2021 Areté Structures supplied (2) FRP Truss bridges to Flowtrack Mountain Bike Trail Builders.  Flowtrack constructed and installed both bridges on the…

Project Overview The Michigan Department of Natural Resources needed two prefabricated FRP pedestrian bridges.  The new structures would be replacing current bridges that were in poor condition due…

Project Overview In July 2021 Areté Structures delivered a 65’ x 6’ FRP Truss Bridge Kit to the Town of Hebron CT.  The town assembled and installed the…

Project Overview In July of 2021 Areté Structures supplied a thirty-foot FRP Truss Bridge to the White Mountain Trail Collective in North Conway New Hampshire.  The bridge was…

Project Overview In April 2021 The Redding Trail Alliance in partnership with the City of Redding California built a 70 foot by 5 foot Areté Structures FRP Truss…

Project Overview Areté Structures supplied a 60’ long by 5’ wide Brown FRP Bridge with sloped end sections to the US Forest Service in the Bridger Teton National…

Project Overview Arete Structures supplied (5) custom FRP bridges for the Grandfather Golf and Country Club in Linville NC. The bridges were fabricated at Arete Structures in Blowing Rock…

In June of 2020 Arete’ Structure supplied a 50’x6’ FRP Truss Bridge for the Town of Woodside California. The bridge is olive green has timber decking and sloped end…

Project Overview In the fall of 2019, IMBA Trail Solutions purchased a 48’x4’ Areté Structures truss style bridge.  The bridge was installed in Hot Springs Arkansas on a…

Project Overview In the fall of 2019 Areté Structures supplied a 30’x6’ prefabricated equestrian bridge to the Maryland Department of Natural Resources.  The DNR reported that the bridge…

Project Overview In the Spring of 2019 Arete Structures designed and supplied a 60’ FRP truss bridge for the Buncombe Horse Trail in the Francis Marion and Sumter…

Project Overview On June 24, 2019, Black Diamond Trail Design installed a 35-foot Areté Structures FRP trail bridge. Installation of the abutments and approaches required two team members…

Areté Structures supplied a 35-foot by 6-foot FRP snowmobile bridge for the Pennsylvania Department of Conservation and Natural Resources Tioga State Forest District 16. The decking for this bridge…

Project Overview For this unique project Areté Structures got to work closely with the client to design this FRP underslung truss pedestrian bridge.  The project required a two-span…

Project Overview In November of 2017 Areté Structures designed and supplied a fully engineered pre-fabricated clear span FRP bridge kit for the Boulder County Parks and Open Space…

Project Overview Areté Structures designed, supplied an delivered a 43-ft x 5-ft FRP bridge for the Waterway Park Home Owners Association in Arlington, Texas. This bridge is olive…

Project Overview This project consisted of the construction of a mountain bike trail for the Munising Bay Mountain Bike trail system. Arete’ Structures designed and supplied a 36ft…

Owner:  Camden County Parks Department, Camden County NJ This project included the removal of 5 pedestrian bridges and construction of concrete footing and reinforced concrete abutment walls for…

Mountains-to-Sea Trail